Remote Control Install in Southlake, TX

In many cases, yes — if the fireplace runs on a millivolt system with a standing pilot, a remote receiver can be added because the thermopile produces enough power to operate the valve electronically. A purely manual key-valve setup with no pilot safety circuit may need additional components first. We confirm your ignition type and valve before quoting, since whether a remote can be added at all depends on what control system the appliance already has, not just on wanting the convenience.

It shouldn't bypass any safety function, and a correct install makes sure of that. A properly added remote operates the existing main valve through the same flame-failure interlock that's already there — the thermopile still has to prove the pilot before the burner will fire. We're careful that the receiver is wired so it controls the valve without defeating the pilot safety, and we verify after install that interrupting the pilot still shuts the gas. Convenience controls are fine as long as they sit on top of the safety chain, never around it.

It depends on how you want to run the fireplace. A handheld remote is simplest for on-off and flame-height control from the couch; a wall thermostat cycles the fireplace to hold a room temperature, which suits using it as a heat source; a Wi-Fi smart control adds app and schedule control but depends on power and your network. All three operate the same valve — the difference is the interface. We match it to your usage rather than defaulting to the most expensive option.

That's one of its advantages, and it's worth confirming for your setup. On a standing-pilot millivolt system, both the valve power and a battery-operated receiver are independent of household electricity, so the fireplace can still be controlled when the power is out — which is exactly when people want it. We confirm whether your configuration is fully battery-and-millivolt based, and we point out that backup batteries need to be fresh, because a dead receiver battery will leave you reaching for the manual override during an outage.

Yes — our crews cover Southlake's 4 ZIP codes across Tarrant County, including Timarron, Carillon, Estes Park, plus the surrounding communities.

We offer same-week scheduling across Southlake, booked by a real person in under two minutes, 7 AM to midnight every day.

Southlake's large custom estates in Timarron, Carillon, and Chapel Downs are built with elaborate full-masonry chimney systems, often multi-flue, where our inspections verify correct individual liner sizing, intact smoke chambers, and adequate clearance to the heavy framing these homes use. With the volume and value of construction here, the prevailing work is the detailed Level 2 inspection at sale, frequently extended to a Level 3 when concealed areas need access to confirm a flue's integrity. Creosote glazing and crown cracking are the safety findings we most often document and prioritize. Remote Control Install is part of keeping that local housing stock safe, efficient, and up to code.