Pellet Stove Installation in Boerne, TX

No, and that distinction is a safety point, not a detail. A pellet stove burns with a fan-forced exhaust and requires its own listed pellet-vent (typically 3- or 4-inch L-vent), not an open masonry chimney or standard wood-stove pipe. The venting is pressurized by the stove's combustion blower, so the joints must be sealed and the run sized to the unit. Trying to vent a pellet stove into the wrong system is a common and dangerous mistake; we install the listed pellet-vent the unit's manual specifies.

Yes. Pellet stoves run cooler than wood stoves, but they still require a listed hearth pad and the manufacturer's specified clearances to combustibles — those values come from the unit's listing and the installation standard, and they aren't optional just because the surface temperature is lower. We set the stove on a compliant pad and confirm the clearances to walls and furniture match the manual. The cooler operation reduces some requirements compared to wood, but it doesn't eliminate the clearance and floor-protection rules.

Because the stove's combustion blower pulls a steady volume of air, and in today's tighter homes drawing all of that from inside can create negative pressure and starve the burn. An outside air kit feeds combustion air directly to the stove, which keeps the burn stable and avoids pulling air — and potentially exhaust from other appliances — backward through the house. Many manufacturers require it, and it's good practice regardless. We confirm what the unit specifies and run the intake as part of a correct install.

Yes — a pellet stove relies on electricity to run the auger that feeds pellets and the blowers that drive combustion and distribute heat, so without power it won't operate and the fan-forced exhaust stops. That's an important planning point in a region that sees winter outages: a pellet stove is not a power-independent heat source the way some other appliances are. We make sure you understand that during installation, and we can discuss battery backup options if outage resilience is a priority for your household.

Yes — our crews cover Boerne's 3 ZIP codes across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch, plus the surrounding communities.

We offer same-week scheduling across Boerne, booked by a real person in under two minutes, 7 AM to midnight every day.

Boerne's Hill Country setting and German limestone heritage produce two distinct inspection profiles: the historic masonry chimneys along Main Street and the large custom stone fireplaces of Cordillera Ranch and Esperanza. Our CSIA-certified inspectors run Level 2 video on the older Historic Main Street stacks, where original limestone and unlined flues predate modern code, and on the tall exposed chimneys of Cordillera Ranch, where wind-driven weather attacks crowns and flashing. Across Hill Country Village's wood-burning homes, we measure creosote against NFPA 211's removal threshold before it glazes. Pellet Stove Installation is part of keeping that local housing stock safe, efficient, and up to code.