Chimney Services in Irving, TX
Serving Irving (257k residents) and surrounding neighborhoods with same-week scheduling. CSIA-certified, fully insured, written quotes always.
What Irving chimneys actually deal with.
A painted or stuccoed chimney is a specific problem and it turns up regularly across older central Irving, usually as somebody's attempt to tidy up brickwork that had started to look tired. Masonry needs to breathe. It takes on some water and releases it again, and paint or a hard stucco render interferes with the second half of that. Water still gets in — through the crown, through the flashing, through a hairline nobody sealed — and now it cannot leave. In a climate with freezes it expands behind the coating, and the coating comes off in sheets, bringing brick faces with it. The other cost is diagnostic: you cannot see mortar joints through paint, so the condition of the stack becomes unreadable until somebody starts removing the coating. What we do about it depends on how far it has gone — sometimes a breathable mineral coating over sound work is a legitimate answer, sometimes the honest advice is to stop maintaining the paint and plan to strip it. What we will not do is paint over it again. In Las Colinas and Valley Ranch the equivalent question is stone or brick veneer over a metal chase, which behaves differently again.
Irving sits in Dallas County within the DFW Metroplex — every job runs the same NFPA 211 inspection protocol, with a written, line-item quote before any work begins.
Areas & landmarks we cover
Pick a service to get started in Irving.
100 services available in Irving — every job starts with a free CSIA inspection and a written, line-item quote before any work begins.
From $16960–90 minChimney Sweep
Creosote graded to NFPA 211 Stage 1–3, then swept clean and documented with photos.
From $10930–120 minChimney Inspection
A graded NFPA 211 Level 1, 2, or 3 inspection with a documented photo report.
From $3001–2 hoursChimney Cap
Flue termination measured, then a stainless or copper cap fitted to NFPA 211.
From $2,9001 dayChimney Liner
CCTV-confirmed liner failure relined with a UL-1777 stainless system, then re-scanned.
From $9251–3 daysChimney Restoration
A Level-2 inspection scopes the failures; crown, masonry, cap, and flashing rebuilt to code.
From $3502–4 hoursChimney Crown
Cracked crown documented as a leak source, then rebuilt with slope, overhang, and an expansion gap.
From $3503–5 hoursChimney Waterproofing
Crown and flashing inspected first, then a breathable vapor-permeable sealant applied to spec.
From $4002–4 hoursThroat Damper Replacement
A cracked or burned-out throat damper cut out of the smoke shelf and replaced with a new frame and plate.
From $2,3001–2 daysFireplace Services
Wood, gas, or electric — installed and serviced to the appliance listing, then commissioned.
From $8001 daySmoke Chamber Restoration
Open joints and exposed corbeling re-parged to a smooth NFPA 211 surface, documented.
From $5252–4 hoursDeep Chimney Cleaning (PCR)
Stage-3 glaze confirmed by inspection, removed by rotary tooling or PCR, then CCTV-verified clear.
From $7501–2 daysChimney Tuckpointing
Failed joints identified by inspection, ground out, and repacked to depth with matched type-S or type-N.
Prices shown are starting estimates and may change with the condition, access, and scope we find on site. Only a written quote from an on-site visit is a price we commit to.
Local chimney service across Irving
Our CSIA-certified crews cover Irving’s 13 ZIP codes throughout Dallas County — from historic masonry to modern factory-built fireboxes. Neighborhoods we regularly work in include:
A crew that works Irving every week.
Your Irving work is handled by CSIA-certified, fully-insured technicians who know the failure modes common to Irving’s housing stock and Dallas County's permitting process. Every job is photographed start to finish, with a written quote before any work begins.
Seasonal maintenance for Irving homeowners
Texas weather is hard on chimneys. Here’s what we tell every Irving homeowner to stay ahead of.
Inspect crowns before the first freeze
North Texas freeze-thaw swings crack masonry crowns fast, and a cracked crown is a documented water-entry defect. A fall certified inspection grades those hairline cracks before winter moisture gets in and splits them open.
Book a post-hail inspection every spring
DFW's spring hailstorms routinely dent chase covers and tear flashing — both findings on a safety check. After any major hail event, a documented inspection catches the slow leaks that rot the firebox before they spread.
Cap the flue against summer nesting
Warm DFW summers and an open, unused flue invite birds and squirrels. A properly fitted cap with a code-spec spark arrestor stops nesting and clears the spark-screen item an inspection checks at the same time.
Scan pre-1990 liners with a camera
Older DFW brick chimneys often have undersized or cracked clay liners that look fine from the firebox. A Level 2 camera scan — the standard for grading a liner — finds the damage before it becomes a chimney-fire risk.
Nearby cities in Dallas County
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line